House Numbers Sign 2-4 Digits (House number as your wish)

Patch revision  :   Base plate (2 - 4 digits) does not have a keyhole that was fixed . And the size of the printable symbols has been reduced slightly to make installation easier.

Multi-colored house number signs that do not require special printing techniques or specials printers (printed separately and assembled together)

For House number 2-4 digits numbers 0-9, / , -

House number sign designed in size 160 x 210 mm. for general 3D printers, numbers size   70 mm.

Each model have a clearance 0.5 mm. for reduced problem of tighted workpiece.

If the workpiece is still tight, you can use a Trimming Knife Scraper to cut the edges or use glue if the workpiece is too loose.

The numbers and blocks should be flipped upside down (front side) onto the bed for Smooth face

Main number plate should be use smooth on option if flip side down will very smooth but still add some support.

For my printed wasn't good due to test model.

Back plate has keyholes for #7 screws to fix to the wall.

add small printable symbol in this sign

REV 2 : Main Numbers Sign was revise proportion of printable symbol