8 colors on Anycubic Kobra 3 Combo Splitter for 8 spools with 2 Ace Pro - No support required

Please give it a 💖 if you like it 🥰

🪧 My Kobra 3 slicer profile 👉 https://www.printables.com/model/1019343-anycubic-kobra-3-combo-slicer-profiles-for-anycubi

You can get a second Ace Pro there:

• on Geekbuying 👉 https://kgy.yt/ganyacepr
• on Amazon 👉 https://amzn.to/3W5So1Q

This is an Anycubic Kobra 3 Combo Splitter for 8 spools to use with 2 Ace Pro. No supports are required.

It is much better to print the body (model1 or model2) with a 0,1 or even 0,05 layer height to make the inside smoother.

In order to have a modular module and easy to diagnostic in case of a problem. I made the model 2 of the Splitter in 3 different parts :

• the top where you add the insert to hold the PTFE tubes
• the middle to limit the PTFE insertion
• the bottom / body that leads the filament to the extruder

Here is my video about it (French) 👉 

The inserts for the model 2 can be found from these links:

• on Aliexpress  👉 https://kgy.yt/ainserptfe
• on Amazon 👉 https://amzn.to/3BfnfBF

For the model 2 I also used 2 16mm M3 screws of with 2 M3 nuts:

• on Aliexpress  👉 https://kgy.yt/am316mm
• on Amazon 👉 https://amzn.to/3XYXu1o

Please give it a 💖 if you like it 🥰

As Amazon affiliate, I may earn a little commission on some sales through my affilation links