Kawasaki/Suzuki merged emblem - logo

Simple emblem for side covers- the result name sounds funny in Polish language (KawałSuki - eng. piece of huge bi*h).

It fits especially for Kawasaki KLV which is in fact Suzuki DL1000 (licence). After traffic accident I decided to rework motorcycle a little bit and this is one of the parts

It's also worth to mention that you should scale down this model depending on your neeeds. In example files you can see 100 and 130mm prints. Both are 3mm high. Made with use of PLA

//edit
PLA is not bad choice but I should chose better glue ;) After first summer sunny day the element fell off. Why? because the double side tape was too weak (after washing at the car wash probably). So please use better glue ;) PLA is not so temperature friendly but it doesn't matter if it's hang on elastic mount (ie. foam tape). If you plan to use strong glue than please consider more temperature resistant material (ASA/PETG etc.)

//edit2

I also added v2 of my emblem with capital S and K inspired by original logo. All projects are in 3mf format so you can just hide redundant elements and print as you wish ;)

//edit3

I added one more logo. this one is much smaller and contains combined logos of Kawa and Suzu