Apple sauce Pouch Holder/Dispenser For Refrigerator

designed this to mount to the rear ladder shelf supports on our Maytag fridge, but should work on just about any Kitchenaid/whirlpool etc with the wide holes. 

the tabs are 10.5mm wide by 17mm tall and spaced 18mm apart.

I uploaded the full model, as well as the two part model exported out of orcaslicer with pegs for easier printing on smaller printers. 

they are both designed to be printed on their back with the lips facing up. no supports required on the lip portion, but you will need a tiny one for in between the two tabs. i just used the support paint tool and made it so that was the only area  supported. 

for the second half, you can either print it standing up, or if it would bug you like it did me having layer lines running two different directions i used some small manual tree supports on each of the pegs “touching build plate only” 

The overhangs on the fillets will print better if you modify your layer height for the first few layers to make the step out less severe.