December 22, 2021
Description
I stepped on my outside light chain cover and it was broken, so I replace it, with a 3D printed version.
In the downloads you will found two version: one of them is 0,8 mm thickness, the other is 2,1 mm thick.
Use transparent PLA!
I print it with support (with 60% overhang angle) and it was hard to remove from glass bed, because of the 2,1 mm thickness and support.
Brim / Rafts could help.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
bartosslajos
