Light-up RGB Celtic Skull

In time of the haunted holiday season, i though id design something special, i already liked the celtic skull that the creator edoubleb made for quite a while now, and why not spruce it up a bit by lighting the skull up for this dark season.

Using a remote control, and a touch capacitive button on the back of the skull, you can turn it on and off, as well as select throught a range of colours and modes on the remote, it is powered by a rechargable battery, but can be used and charged plugged in as well with a usb-c cable.

I have also slightly improved on the model a slight bit, one by making the first layer much easier to print out, and secondly by removing all the floating/hard to print small bits included within the model, and i guess thirdly by resizing the original model into 3 sizes, 14cm wide skull (average human sized), a medium 9.5cm model, and a small 5cm ish model.

I bought both the light, as well as the battery both on aliexpress for under $10, the light you probably wont be able to find the exact copy off anywhere else, but for the battery, i just used a PS4 controller battery, as they were the cheapest to buy off aliexpress, if you want to build this in time for halloween, id reccomend ordering parts a few weeks before, for me living in the UK, the parts arrived within 2 weeks.

Light link: https://www.aliexpress.com/item/1005007441037012.html?spm=a2g0o.order_list.order_list_main.106.21ef1802BRSRX5

Battery link: https://www.aliexpress.com/item/1005004076614853.html?spm=a2g0o.order_list.order_list_main.5.ae201802tnjJUl

Print Settings

Printer Brand:

Creality

Printer:

**Rafts:**

No

Supports:

**Resolution:**

0.2

Filament: Sunlu/Jayo PLA/PETG clear/white

Category: Scans & Replicas