September 29, 2024
Description
A binocular mount that fits a Focal tripod shoe.
Printed in PETG with three perimeters for added strength. The print uses 15% infill from the base up to about where the washer makes contact (at 65 mm). From there up to the top I switched to 100% infill. This ensures I don't crush the part when tightening the bolt.
Printer Brand: Prusa
Printer: i3 MK4
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: Varies
Filament: AmazonBasics PETG Grey
License:
Creative Commons — Attribution — Noncommercial
Audi
