September 30, 2024
Description
This a fume extractor constructed from a 12V PC fan (80mm x 25mm). I originally planned to use brass inserts in the Back housing, but ended up just threading the M4x20 screws into the PLA. There are still bores in the housing for inserts if desired. The charcoal filter is sandwiched between the Front housing and Filter housing using M3 screws.
0.6mm nozzle, 0.3mm layer, PLA, Sovol SV01
License:
Creative Commons — Attribution — Noncommercial — Share Alike
9
southbaygsr
