Hex key stand

A very fast and easy to print desktop stand for your hex keys. The design goal was to make it as simple as possible. I ended up with only two different parts. Print every part 2 times and you end up with a total of 4 parts. Depending on how well your printer is calibrated, some sanding may be necessary. Make sure to keep a tight fit and you don't need glue at all (like mine).

Since the 3 mm key has a larger shaft diameter, you correspondingly will find one of the outer holes with a larger diameter as well. Have this in mind when assembling…

If you like this design, please post your print with a picture.

Anybody willing to support with a small donation is more than welcome ;-)