Shelf Bracket

A simple Bracket to support shelves. If you are making plastic shelves or wood, it is recommended to print the support to keep the shelves level and prevent the Bracket from being pulled out of the wall.

The “extra support” slots into the L shaped bracket via a hole in the middle of the L Shaped bracket. A flat headed screw can be screwed through the hole into the shelf and be hidden with the “extra support”. There is no pilot hole on the “extra support”. Once lined up with the L Shaped bracket, the “extra support” won't move around. A Screw can be screwed through the “extra support” (like in the picture) to ensure nothing moves. 

Print settings are simple:

15% infill with 6 Perimeters and 0.2 layer height is all that is recommended. Print Both on their sides and use snug supports (0.3 top contact distance/0.1 bottom contact distance) for maximum support.

Happy Printing :)