SKADIS Pegboard for a BROR Shelf

Pretty simple - We wanted to have my tools close by and organised so we copied the IKEA SKADIS pegboard and redesigned it to mount to a BROR shelf.

There are two kinds:
CORNER sections - These are for a single BROR shelf. Add them to each side. The top part is curved to match the shelf.

DUAL sections - These are if you have two BROR shelves together. Top part is also curved.

You need 2 M5x25 bolts and 2 M5 nuts for each section. The BROR has holes in it already for mounting things.

We used 3DJake PLA to print these: https://www.3djake.com/3djake/3djake-filaments
5 walls, 5 top and bottom layers and 20% infill. CORNER sections require supports. DUAL sections don't.