October 3, 2024
Description
Recently printed out Deadpool and Wolverine masks and needed a stand. So I put this together.
You will need a 3/4 inch wood dowel cut to your preferred length.
Plaque - has a notch in it so it can be glued on the base at an angle. You can also glue it facing straight up on the base if you like. I paused the print for the color change on mine.
I did use supports on the notch in the plaque.
base-bottom.stl - This doesn't need to be printed unless you want the bottom covered. It is only 2mm thick so adjust the Z height in your slicer if you need it thicker.
Deadpool stand can be found here - https://www.printables.com/model/1025130-deadpool-helmet-stand
License:
Creative Commons — Attribution — Noncommercial — Share Alike
BDubil
