KOBRA 2 MAX Up position Filament Sensor

I still prefer the traditional filament placement because it is easier to work with in a chair. But I don't like the position of the filament sensor that is difficult to feed. 

  I upgrade position to above for easy to feed for me. also move all control cable together.

    Material need;  M3 x 20  2 pcs. & M3 x 10 or 15 mm. 1 pcs.

1.  Turn off the printer.
2.  Take out filament sensor , pneumatic connector and Teflon guide tube
3.  Place model on plate . use long arm hex key insert from top hole to install model in  existing filament  position with M3 x 10(15)
4.  Install filament sensor on top with 2 points(M3x20 mm)
5.  Install pneumatic connector and Teflon guide tube
6.  Cut cable tie at control cable in slot (under filament sensor) and move to new position