Prusa Mini Emclosure RJ45 Extension Holder

RJ45 Extension Holder for the Prusa Mini Enclosure, which can be screwed to the back of the enclosure. This makes the enclosure more transportfriendly because now you have an easy to reach connection for your LAN cable. All you need is a 50cm LAN cable, 1 M3x8 screw + 1 M3 Nut (both are included in the Mini Enclosure set). You print the holder in PETG standing on the left side (after importing into Prusaslicer) without any supports.

This is the RJ45 coupler i used: https://www.amazon.de/dp/B0CCCKKQVB

If you use a different one, you may have to adjust the width, length or height of it in the model, so i include a Fusion360 file for it, just change the paramenters and the model adjusts automatically.