Portrait stand for Adafruit eInk Featherwing

Print with the front of the display flat on the print surface. Mount the featherwing with 4 M2.5 screws & nuts.

The version shown above was sliced with orcaslicer and printed on an MK3s in Prusament Mystic Brown on a hologram build plate with 0.20mm layer heights. The first layer infill was set to Hilbert Curve, and mouse ears were used to improve adhesion. No support is needed.

Design files (FreeCAD) and solids model (STEP) are included. The FreeCAD design files embed a copy of the eInk FeatherWing's PCB outline, which is released under an Open Source Hardware license.

More details on the related Adafruit Playground Note.