Sanding Disc Plate 125 mm 4 Cordless Drills

Heyho.

Quite some time ago I designed this adapter for my cordless screwdriver.

I really like to use the discs with foam cussion beneath the velcro. But for some Parts I really had to keep the surface flat and clean and not round the edges.

So I designed this adapter.
 

When I first designed this I wanted to overengineeer it a little bit I guess xD I designed it to add 3 x M2 Screws for a better layer adhesion in the middle section and I added air funnels to cool the plate down while grinding.

Well I don't really know if it was necessary but it worked out for many projects yet! So Don't touch a running System :P
 

Print Instructions:

Use Heat resistant and tough materials! My first prototype was printed in (Prusament) ASA and later on I printed some plates with (Nobufil) PCTG. But PETG should work fine too I guess!

0,2 mm layer height, 100% Infill, 3-4 Perimeter.

In addition to the printed parts you will need an M14 Screw adapter and a self adhesive Velcro with 125 mm Diameter. You can find these parts everywhere online for a few bucks. Examples:

Have fun!