Candy Corn Magnet

a multi object .3mf file that represents a single piece of candy corn with two magnets for mounting.  The magnets are 6mm diameter 3mm thick neodymium magnets you can pick up at amazon.

When you open the .3mf file, if the slicer asks if you want to treat the model as a single object with multiple parts, click on yes.

Make sure you set the desired colors for each object.  

I recommend printing face down to avoid overhangs/needing support. 

The magnets should press fit, but if not, use a little CA glue.

I made mine with PLA in marble, light orange, and yellow with a black background.  The photo doesn't really show the orange well.  0.2mm layer height should work well.