Self Watering Hexagonal Plant Pot

i previously designed an octagonal self wtering planter but this is what i think is a supirior design the water resivoir is integrated to the inside so you can fit multiple right up together. and hexagons just look better. i had a problem with mosquitos so i added a water cap. its not required but there if you want it. i left out the holes in the bottom of the inner part to print faster i found its easier to poke holes with a drill bit or an old soldering iron. the license says free for commercial use but id appreciate it if you didnt distribute the files, just the prints. 

on the inner pot, its desinged to be printed with no top layers and 0% infill. i dont use vase mode because i like it to be a little thicker than a single layer i prefer 3 walls, but whatever works for you is fine. 

UPDATE: Added Outer V2 the inner corners are chamfered to make it hold water better.