December 4, 2024
Description
Detachable devil horns for motorcycle helmets. Can be detached from a base on the helmet. Mounted using a twist lock / screw mechanism.
I recommend printing it in PETG and printing screw_in_mount and screw_insert slower for better print quality depending on your printer. I also recommend printing the top of the horn slower for better overhangs.
For a set of 2 horns you need every file / part two times.
screw_insert.3mf is glued into the bottom of horn.3mf (check orientation relative to screw_in_mount first so it fits correctly).
screw_in_mount.3mf is attached to the helmet.
No supports needed.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Norfus
