LED Cover/Diffuser

Print notes:

Printed on Ender 3 V2 Neo I faced some issues, the 0,4 mm nozzle worked fine but I recommend even lower diameter. The best results will be achieved with an SLA printer but FDM works.

Slicer settings:

1. Supports:
   1. Use paint on supports and dot the overhangs like this

1. The result should look like this

1. Now print
2.  
   1. Layer height = Lowest possible
   2. Infill = 0%

Notes:

The quality of the diffuser depends on quality of the 3D print