Simple handles for cabinets and kitchen

Handles come in 5 different standard sizes (center to center):

❌ 96mm 
✔ 128mm
✔ 160mm
✔ 192mm
❌ 320mm

✔ Tested - PLA  | ❌ Not tested

TOOLS 🧰

• Philips* screwdriver (do NOT use a drill❗);
• 3.5 diameter wood screw (the length varies depending on the thickness of the door where the handle will be installed, keep in mind that the depth of the handle holes is 1cm, so choose the screw carefully);
• lighter or rather a torch lighter.

*you can use the screw drive style you prefer.

INSTRUCTIONS 🗒

I recommend heating the screw tip with a lighter before screwing; screwing the screw while still hot will melt the PLA and avoid breaking the handle, also ensuring a better seal.

TIPS 💡

if you remove the handle and decide to reuse it, I recommend you first melt some PLA inside the mounting holes as they will be wider and proceed with assembly as per instructions.