calvin pumpkin magnet

a multi object .3mf file that represents a pumpkin with Calvin (from Calvin and Hobbes fame) cut out of the front.  It has space for two magnets for mounting.  The magnets are 6mm diameter 3mm thick neodymium magnets you can pick up at amazon.

When you open the .3mf file, if the slicer asks if you want to treat the model as a single object with multiple parts, click on yes.

Make sure you set the desired colors for each object.  

I recommend printing face down to avoid overhangs/needing support. 

The magnets should press fit, but if not, use a little CA glue.

I made mine with PLA in yellow and a pale orange.  Sadly, I didn't have any better colors available at the time.   0.2mm layer height works well.