December 22, 2021
Description
Simple clip to keep two USB-connectors together. I found that a typical pair of USB-A-Size connectors, plug+recepticle often do not really hold well together. There is no locking.
This clip is based on a parametric FreeCAD drawing, but you can easily scale it in your slicer to
adapt to different lengths. As is, it fits a pair of connectors that is 67mm long.
one side has a 9mm hole, the other side has a 7mm hole, as often the recepticle connector is much thicker in the end.
License:
Creative Commons — Attribution — Share Alike
9
Jürgen Weigert
