TLR-1 HL dummy for Mantis X10

I modeled this to work with my Sig Xten comp 10mm with a Four Brothers holster, but it works with my Gunfighters Kenai holster as well. it should work with other guns as well.

I made this since my holsters tensions off of the light and not the gun itself. So to have the proper tension for draw training, and not having the gun sit to far in the holster I wanted something that would mimic the light. There is a button on the bottom so you can turn the Mantis on/off without needing to remove anything, and the status light is still visible.

Print it with the “light” part facing down on the build plate with supports. the button should be oriented with the wide section at the bottom. I used PLA, but you can use whatever your heart desires.

The button is not retained. So don't forget to put it in before mounting it to the firearm.

You need a M4x25 cap screw and nut.