Nut/Screw Cover for M5

Can be used to cover your M5 nut and screw. Creates a much cleaner look on the inner side of door or drawers. The cover should sit tight on your nut. If for some reason it fit to tight or is to loose, you might need to scale it for your needs.

Dimensions: Height: 11mm Outer Diameter: 15mm Inner Polygon for the Nut between two flat sides: 7,9mm

Printing Parameters

Support Yes Print Speed 50mm/s Infill 20% Travel-Speed 100 mm/s Nozzle-Temp 210 °C Build plate Temp. 60°C Layer Resolution 0,1 mm Nozzle Diameter 0,4 mm Print Time 15 min Filament PLA Orange Amount of Filament 1,2g Used Printer Anycubic i3 Mega

Category: Household