Sleek Carabiner (Travel Essential)

This is a great model that is very useful and can be printed quickly with an almost no fail rate! This model works great and is useful to attach to your everyday backpack! Make sure to try out a lot of different colors so then it would look great and sleek (its in its name 😉)

***Also do not use this filament for Climbing of any sort, it could break if a large amount of force and weight are applied to it. (I am not liable in any way for this happening) 👌***

I would definitely recommend using a strong filament (but PLA works to) so then you can have a good experience and the carabiner will be sturdy! (I would recommend trying out TPU just to see what would happen)Just a heads up the more you use it the more the tension for it might be put out of place, so if you keep pushing it out of place it is more likely to stay that way. But that shouldn't be a big deal!

Make sure to check out my patreon page! If you join for free you can receive (free) exclusive models only on my patreon! Also have access to more updates, polls, requests, and many other things!  My Master Printer Patreon

Make sure to check out this collection for more travel essential models! Enjoy! Travel Essential Models Collection

Print Settings: 

Infill: 10%-100% (Depends on what you use it for)

Infill: Gyroid

Supports: NO

Brim: NO

Filament: PLA or PETG or ABS/ASA or TPU 

If your printer is not calibrated enough or is a bit older make sure to use this setting. Go into Prusa slicer then navigate to ‘print settings’ then find ‘advanced.' Once you find that scroll down to ‘slicing’ then 'X/Y Compensation. Once you get there change it to -0.1 or -0.15. If for some reason your printer is still melting the walls into each other change it to -0.2 or -0.25 at the most. Hope that helps enjoy! 🤓

Enjoy the model!