When I needed a depth limiter for the drill, I downloaded models from other authors. These are interesting models with a collet lock. But in fact, they were useless, because the fixation on the drill was insufficient and the limiters simply slipped, especially when working with the hammer drill. So I created my own drilling depth limiter design.
I made three of the most popular diameters for drilling with a hammer drill 6-8-10mm. However, you can use the source file to modify it for yourself.
The model is printed without support, print in place.
To complete it, you will need: M4x12mm Hexagon Socket Screw and M4x7x2 Square Nut.
Parts links below:
M4x12mm Hexagon Socket Screw
M4x7x2 Square Nut
Multi-function 18 In 1 Universal Wrench Keychain
Useful Links:
Heating Tube 12V/24V 70W High Temperatu
Noulei silk PLA Filament
Trianglelab Highall-metal V6 Hotend
Deburring Burr
Print Settings
Rafts:
No
Supports:
No
Resolution:
0,2
Infill:
15
Filament:
PolyMaker PLA
Notes:
The filling of 15% in my case was sufficient for the material to retain strength and be elastic when the lock is compressed.
Category: Machine Tools
Mikhail Babarinow
