FLY ADXL345 Bed Mount (less than 1G of plastic)

A model that provides a stable, sturdy, and completely reversible mount for your ADXL345 for input shaper calibration.

Requires two M2x4mm screws. 

1. Print the model, but when it concludes keep your bed heated
2. Screw ADXL345 into the mount using M.2. screws, being careful that the screw you're using isn't too long (so you don't screw into your bed!)
3. Run input shaper for the Y axis
4. Peel off the mount and dispose of it!