October 14, 2024
Description
Al Capone with his Colt 45.
Grab my newest file releases FREE before they get released on other platforms by clicking here: https://makerworld.com/en/@zigzag
During the slice there is a good chunky pause at 25%, but just wait it will happen.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Added files for Bambu & AnyCubic
The Model is 200x133.45mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ IIID Max Red Transmission Distance: 4
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.72mm) swap to Red
At layer #12 (1.12mm) swap to Pure Yellow
At layer #17 (1.52mm) swap to White for the rest.
License:
Creative Commons — Attribution — Share Alike
NoProblem
