MK4S - Hotend-Fan shroud and Print-Fan holder

Although I am still waiting for my Upgrade-Kit from MK4 to MK4S I thought about how to keep the fan shroud I use to prevent the Hotend-Fan blowing towards the print bed.

I just tried to make a part replacing the metal mounting part for the new Print-Fan and including my shroud from the MK4.
As far as I can see the small spacer needed to mount the original parts should not be needed anymore.

As I said, I did not yet print it beause the kit has not arrived yet.

A bit of support is needed for this.
May be the original screws for the metal part are a bit to short for this, but screws are cheap.

UPDATE: Added two variants with other wall thickness.

UPDATE 21.10.24: Still not received my updated kit, but noticed today that the new door (protecting the cables) will not open as it colides with the shroud.
I will leave the old Version available and add 3 new files, just in case someone may still want to use them.

UPDATE 22.10.24: Added two variants without the inner part which should go into the gap in the fan case.

UPDATE 27.10.2024: Meanwhile I received my Update Pack from MK4 to MK4S and noticed that my construction does not work very well. So I redraw the part and made it a bit thicker.
Now it works ok for me, although it is a real pain to print the part with the overhang.
I deleted the other variations as they do not work good.