Magnetic Hygrometer Mount

I wanted to mount a hygrometer (humidity sensor) to the inside of my spool dry-case with magnets, but didn't like any of the designs that I saw. Specifically, I wanted to reduce the profile in order to expose more of the sensor, save on plastic, and decrease print time.

This uses the 10x3mm (2.6mm actual) magnets that are popular on Amazon.

I used jewelers glue (G-S Hypo Cement), but I'm also including a design where you can print the magnets in place by pausing the printer, inserting the magnets, and let the printer print over them.

I was able to print them on low resolution/quality (.28mm layer height) fine.