October 10, 2024
Description
This is a stabilisation clip as add-on to the model provided by @philiip11 in order to provide a bit more stability. You need at least 2 of them to connect the left and right side of the hurdle. The diameter of the holes is designed for 10 mm wood sticks / dowels. Probably, the original printed polse (11 mm) won't fit. Just send me a PN in case you need other diameters and I can upload the files for you.
Due to the geometry of the clip, I recommend to print it 45° upright, as provided in the *.3mf file and use organic supports.
License:
Creative Commons — Attribution — Share Alike
Joe's wood'n 3D
