October 10, 2024
Description
Its a super tight fit, but with good PLA you can spread both clips with your charger and snap it in place. Hole for a charger at the top and it holds super securely.
2 walls 15% crosshatch infill 3 top/bottom layers, I used PolyMaker PolyLite PLA
Use:
m3 Skadis t-nut (what I use)
https://www.printables.com/model/450444-skadis-t-nut-mounting-system-threaded-for-m3-or-un
or
original m2/m2.5 Skadis t-nut
https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb
License:
Creative Commons — Attribution
7
GlowKitty
