Witch's Cauldron with Bubbly Lid | No MMU or AMS needed

Here's a spooky cauldron for your Halloween treats  featuring a bubbling potion and the remains of an unfortunate soul! 💀

After years of brewing, a small crack has formed at the top of the cauldron. While it adds eerie charm, it also serves two practical purposes: simply press down on the lid near the crack to pop it open, and the crack cleverly conceals the z-seam once the print moves past the cauldron's handles. The lid locks securely in place with a satisfying “click” by twisting it clockwise.

I printed with Arachne wall generator, 0.2mm layers, 2 walls, and 15% infill.

• An important note for the bubbly lid: increase the number of top layers to 6. I was experiencing weird extra extrusion lines on the ends of the bones when I had 5 or less top layers. 
• The brew lid can be printed with simple filament swaps on a single extruder printer without a multi material setup

Are you interested in selling your prints of my designs? Join my Printables Club, and start making 💰 with your idle printers!