VzBoT - Z axis extension

VZBOT 235 AWD - CNC kit

Z axis extension
Extension of the Z axis by 20mm more; final total 220mm.
I really disliked the height of the Z axis of only 200mm,
the reserve on the rods was sufficient, so 20mm is quite useful.

There is no need to disassemble the Z axis,
just loosen the screws on the LMK10LUU bearing and lift it up.
Then the printed piece is inserted from the side
and new (longer) screws are tightened.
That's all!

Required screws: 16x M4x30 BHCS

Print from ABS, ASA, PC or PA (CF)