X Grip Articulated Phone Stand

Recommended to be printed in PETG. ASA for gripper arms if you can. This model needs no supports or hardware. It will need glue to attach articulating arm to the back grip housing itself. The articulating base/arm components are a remix of Jacks 16mm articulated arm. So you can add as many joints or extensions as you like(16mm size). I Included all the parts needed for the setup pictured. 

When the springs are inserted make sure you preload them in the correct direction (counterclockwise). You will have to twist the spring with you fingers then insert the square gripper peg. (Glue wont hurt here.) That should lock the gripper arm against the side of the case. Repeat for the other side then lock the two cases together. That's it! Any questions just ask.

Attach arm to gripper housing with glue or epoxy.