Pumpkin Click-it Fidgets for Halloween

Click-it Fidgets are a perfect non-sugary treat to hand out for Halloween! 🎃 I've included a pumpkin base with and without the keychain hole too! This set of Click-its has six jack-o-lantern faces to choose from plus a blank pumpkin.

Simply add a keyboard switch to attach the two halves together and provide an extremely satisfying “click” to your Click-it Fidget! These are the keyboard switches that I have been using. The white version makes a nice loud “clickety clack”! 😉 I like to insert the keyboard switch into the base first, and then I press the jack-o'-lantern face on for easy alignment.

These switches have two metal pins that I fold over before inserting them into the base.

Please leave a comment if you have a different brand of keyboard switches that fit too!

Print Settings:

These are intended for a multi material printer. The black is two layers thick (0.4mm thick assuming a 0.2mm layer height). Since both the base and the cap are printed face down on the build plate I set the number of bottom layers to 6, use Arachne wall generator, and 1 perimeter on the first layer. If you experience trouble with the first layer try slowing the first layer speed down to around 30.

Want more Click-its!?

Are you interested in selling your prints of my designs? Join my Printables Club, and start making 💰 with your idle printers!