Arduino uno and breadboard mount

Hello!

For a project i needed an enclosure for a breadboard and arduino uno. I made it so you can fit on different objects of your liking. with holes on the side!

You will need for this project.

• 4x m3x10 bolt ( you will need to cut them down to 7 mm )
• 4x m3 nut 
• 4x m3 bolt in what lenght you will need for your project
• small flathead screwdriver
• lighter 
• 3d printer

Printer settings

• layer heigt :0,3 mm ( i like fast prints haha, can use finer settings)
• Material: PLA (can use other materials of course)
• support: Yes (watch were it puts the support en remove the supports close to the walls)
• Heated bed: Yes

Install

After your print is finished follow these steps

• Remove your supports.
• grab a nut heat it with a lighter.
• Press fit the four nuts in the pre made hexagon holes until flush with the material.
• Saw the 4 m3x10 bolts to size using a metal saw.
• Sand down the metal burr.
• install the arduino uno (use the picture as reference)
• intall the breadboard bij press fit it in the other side of the mount.
• if you need it you can use the other m3 holes to mount it to stuff of your liking.

and you are done!

I will keep posting updates for other mounts!

If you want other dimensions let me know!