Drum Stick Case

My wife participates in “Exercise Drumming” classes at her gym most days, and is a fan of Twenty One Pilots.  She asked for drumsticks for her birthday, so I bought a pair of Josh Dun signature drumsticks for her.  They didn't come with a case of any type, so I figured I'd make one.

The case is split into two friction fit parts, each configured to print on their solid ends.  The taller of the two sides is nearly 250mm tall, which fits fine on my P1P, but your milage may vary. :)

If your slicer asks if you want to convert the measurement system to millimeters, choose no. 

Make sure to change the colors of the parts.  In my print, the right side of the case is black PETG with a yellow PETG logo, while the left side of the case is yellow PETG with a black PETG logo.

If you are likely to leave the case in a hot car, choose an appropriate material.  0.2mm layer height with 3 top and bottom layers and 3 walls with 10% gyroid infill worked very well.