YoLink Refrigerator Temperature Sensor Mount

This is a holder for the YoLink temp sensor for your refrigerator and freezer.  There are six spots on the back to glue round 6mm x 2mm neodymium magnets.  I recommend putting a magnet in all six spots.  I used super glue to keep them in place.  PETG is what I printed these in with 1mm perimeters (top, bottom, sides).  No supports are needed for this.  Later I will look at making versions that will take larger and fewer magnets.

Temp Sensor Mount2 has some reinforcement because the temperatures in the freezer were making the bracket a bit brittle.  Added spaces for two more 6mm x 2mm circular neodymium magnets.  No supports needed.  Print with 1-2mm perimeters (top, bottom, sides)