Use the Force Wall Sign and Keyring

When the going gets tough, this Star Wars themed sign and keyring can help remind you to use the force!! Particularly useful in dodgy bathroom scenarios for you, or as a gift for a loved one.

Printed with 0.2mm layer height, 100% infill, with a filament change occuring on layer 6. The design is meant to be 2mm thick, with the detail change happening after 1mm. If you change the thickness just be sure to remember that the detail changes in the second half of the print.

The photos show a large & small sign, plus a keyring variation of the same design. The dimensions for the sign/sticker are to be scaled up in your slicer. The dimensions from the photos are as follows:

Large Sign - 140 x 100 x 2mm 
Small Sign - 60 x 40 x 2mm
Keyring - 40 x 25 x 2mm

Hole for the keyring is 4mm and fits nearly all large and small keyrings available. There is also a small groove left where a sticker can be placed. One example of a use case for this would be to attach a QR code with your contact details incase you lose the item the keyring is attached to and a good samaritan happens to find it, hopefully increasing the chance of you being reunited with your items again. 

To attach the sign we just used adhesive pads, but any method should work. If you want to hang it on an existing nail, you can scale the keyring model up to the dimensions required and use that.