June 13, 2025
Description
Inspired by the great designs already out there, I made this adaption with added 140mm fan and optional keystone module (to house a HDMI keystone passthrough). I found that the heat generation on the 13th gen i9 is too much and this case really needs more airflow. Recommended is a 140mm fan optimized for static pressure, such as the Arctic P14.
The models print without supports if your bridge settings are somewhat tuned; print the cage face-down.
PLA is possible but not recommended, since the MS-01 can reach 60C easily, ASA, ABS or PETG is recommended.
Use 4 walls, 40% (cubic) infill, 4 top and bottom layers on a 0.4-0.5mm nozzle.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
maze
