Trijicon Credeo 1-8 LVPO Anti Reflection Device

I used a kill flash design found here:
https://www.thingiverse.com/thing:4875497/apps

I created a ring that allows the user to snap it over the Credo 1-8 LVPO.  My ring sets the grid back from the face a few millimeters to help protect the honeycomb grid. It also has a slightly smaller ‘friction ring’ designed into it so it holds tight to the end of the scope body. 

This was designed to be easy to print. I used a 0.2mm nozzle so I could print 0.18mm walls. The honeycomb grid is just a single wall. You could use a 0.4mm nozzle but you may have to change the scaling to get everything to work.

Printed with a Creality Ender3 V3 SE and Creality HP PLA+.

The STL contains both files. Print as oriented. Press the grid into the ring, secure with a small amount of superglue or B-7000.