October 30, 2024
Description
This is a Quick mod for the Beamcase ATX Panels, allowing Makerbeam profiles with a length of 360mm. No additional Material needed, however they do support my Front IO mod.
Print them like you want, just make sure not to use PLA. The Sides can be mirrored, depending on wether you want an open/closed back.
The Bottom parts should be printed 2x, because they are also used for the top.
2024/10/30: Added Closed Top/Bottom Panels
License:
Creative Commons — Attribution — Noncommercial — Share Alike
Mac10goesBRRRT
