Cammus CP5 Pedals

I designed these to get a more comfortable angle on the CP5 pedals from Cammus when mounted in a wheel stand. I found the angle far to shallow for use in a wheel stand.

I have provided 3 total variants, though only 2 really. One is a 7 degree angled wedge for both pedals, and the other is a 15 degree wedge with a slightly different gas pedal. These bolt straight on to the existing mounts and holes with enough room to adjust them up or down if you desire. Use M3x8mm SHCS to mount.

Print in PETG or ABS/ASA; PLA is probably fine too, but I worry about it cracking. Object orientation is as provided. 4 walls, 5 top and bottom layers. 25% gyroid infill. They should be plenty strong, and last. The ones in the picture were heavily used by my kids (thus the dirt) for weeks now. I found these much more comfortable as compared to the stock angle and metal.