Next Gen Power Cable Winder (Print-in-Place, Multiple Sizes, Stackable)

The concept of my Next Gen USB Cable Winder is scalable even to larger sizes.

Thus, here is a Ø100 mm Version with a 35×15 mm² opening sufficient for standard Euro power plugs. As with the USB version, the cable can be easily pulled to the outside.

Print in Place with standard slicer setup (2 perimeters, 15% infill). It is tempting to print with more perimeters, but experience shows then prints to fail. Reduced print temperature (-10°C) might be helpful. Organic support for cable cutout is recommended.

See the original design for other hints.

PLA+ and PLA are recommended materials. Just contact me for other sizes.