Hustler 5btv 4btv 6btv guide wire mount

The manual shows how to tie the guide wires directly to the antenna, but I made this to give you something to tie to.  I attached mine to the 6 point spider just above the 20 M trap. (I'm using the 5BTV  however this should work on the 4btv and 6btv) 

I used mastrant brand 3mm guide rope the holes are 5mm however other guide ropes should work. 
 

The center hole is not tight but just slightly loose on the pole, (as the point is to help guide the antenna not actually fully tie it down like you would with  a tower) 

I printed mine with ASA filament since ASA is UV rated.