October 21, 2024
Description
Simple housing with additional strain relief for XT60H connectors - one version for both male and female.
You can solder two separate wires up to 12AWG (outer diameter of cables - 4.5mm MAX) or one “2-core cable”.
Make sure to dry-fit the enclosure because not every connector is equal in dimensions (especially the fake ones), and check that the two halves touch each other where you apply the CA glue.
I printed the objects with ABS at 240/100° with 15% infill (0.6 nozzle and 0.3 LH). Use supports on build plate only.
License:
Creative Commons — Attribution — Noncommercial — Share Alike
10
kincloop
