Cute Melted Candle Holder - SEREV3d

By now we have a collection of amazing and cute candle holders! Let us present the latest one:

⭐ Cute Melted Candle Holder

You can use this design and all the other FREE SEREV3d Collection to participate in the SEREV3d Halloween 3d print Contest to win awesome prizes: https://www.patreon.com/posts/114323284

Recommended filaments:

►Bambu PLA Matte White

Or

►Bambu Dual Silk Filaments

Recommended led tealight:
▶D37.2x36.6mm LED Flame Tea Light Candle Set

------------------------------------

Print difficulty level: Beginner

Print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in the 3mf file)

-Layer height: 0.16-0.2mm (within this range it works well, the lower the layer height, the less you can see the layer lines)

-Wall loops: 2

-Infill: 10%, Gyroid

-Support: a minimal amount of support is needed under the two arms, you can activate Auto Tree(Organic) supports with a 30 degree threshold angle, TopZ distance 0.24, BottomZ distance 0.2

Estimated print time: 1.5h-2h

-----------------------------------

Painting and & post process instructions:

1. Prep: Use white filament and sand the model lightly to smooth any layer lines (recommended to use wood filler/or plastic putty, and primer spray with a little bit of sanding to minimize layer lines visibility)

2. Base Coat: Spray the entire model with a light ivory or cream primer as a base coat. This gives the model an even starting color and helps subsequent paint layers adhere better.

3. Shading and Depth: Use a wash technique with diluted brown, reddish, or orange acrylic paint. Apply the wash into all the crevices (like between the wax drips) to create shadows. Wipe off any excess from raised areas with a paper towel or cloth. Airbrush or hand-paint gentle red and orange tones around the lower portions of the model to create the melted wax effect, blending from dark at the bottom to lighter at the top.

4. Highlighting Details: Lightly dry-brush off-white or very light beige paint on raised areas, like the edges of the wax drips. This adds dimension and makes the model look more realistic and "organic."

5. Sealant: Once the paint is dry, apply a matte or satin clear coat to protect the paint and give the body a soft wax-like texture.

For the eyes to look nice, shiny and alive: Paint it using glossy acrylic paint or black enamel paint. Apply at least two coats to get a rich, solid black finish. To get the shiny effect, after the black paint has dried, apply a layer of glossy clear varnish or resin over the eyes. This will give the eyes a reflective, glassy appearance.

-----------------------------------

Have fun, we are looking forward to see your 3d prints!

Don't forget to show off your awesome makes on

►Our Patreon chats: https://www.patreon.com/serev3d/chats

►Or in our SEREV3d facebook group: https://www.facebook.com/groups/1569100737016945

Join our SEREV 3d Patreon All-access SEREV Member tier for ▶▶Commercial license and access to 50+ awesome 3d printable designs, for ONLY $13

Print Settings

Printer Brand:

Bambu Lab

Printer:

Bambu P1S

Rafts:

No

Supports:

Yes

Resolution:

0.16

Infill:

10

Filament: Bambu PLA White Notes:

-Layer height: 0.16-0.2mm (within this range it works well, the lower the layer height, the less you can see the layer lines)

-Wall loops: 2

-Infill: 10%, Gyroid

-Support: a minimal amount of support is needed under the two arms, you can activate Auto Tree(Organic) supports with a 30 degree threshold angle, TopZ distance 0.24, BottomZ distance 0.2

Estimated print time: 1.5h-2h

Category: Decor