Halloween tealight projector

BACKGROUND
I wanted to make something creative with tealight, which is not that simple because of the heat and the fact that, tealight is not an extraordinary light source, to say at least.

So… here it is! Simple device with changable “screens”, that lets you project simple shapes on the wall with the POWER of tealight.

CONTENT

In the package you will get:

• Base_basic - most simple one, to place your tealight and chosen screen
• Base_castle - more stylish one looking alike part of castle with bricks, bats etc. Bats can have nice semi-transparent effect when you print with filament alowing some light to pass through it.
• Three screens to choose from: with bat, angry pumpkin and with spider
• Additional Screen_blank that allows you to try and cut your own picture on it, print and check the result.

PRINTING INFO

Because of the heat I would say PLA is not preferred material, cause it may end up with deformation because of heat creep, but… you can try. For me PETG did just fine. Besides that it is a simple print, not demanding for printer. you can go up on layer thickness. 
All models provided in printing orientation. Minimal support needed and only when printing base.